Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Greensboro Homeowners
A wood fire that smokes back into the room, a flue that smells of creosote in July, or a stove that just doesn’t draw the way it used to – these are the problems a proper sweep solves. Our technicians have up to 11 years of experience reading what a chimney is telling them. We work with professional-grade materials from brands specialists trust, including DuraFlex, HeatShield and Olympia Chimney, and we handle the sweep, the inspection and any repair that comes out of it. For Greensboro homeowners burning oak and hickory through the cooler months, a clean flue is the difference between a safe fire and a slow buildup you never see. Same-day appointments are often available. Call (888) 366-5537.
Chimney Sweep Services
Chimney Sweep Services cover the physical removal of soot, creosote and debris from the flue, firebox and smoke chamber, and you need them whenever a season’s worth of burning has left deposits behind. Greensboro Chimney Cleaning handles the whole task with rotary sweeping and a camera inspection, then shows you what came out. Typical chimney sweep pricing in Greensboro runs $150 to $280 depending on flue length, how heavy the deposit is, and whether the job includes an insert or a wood stove. The estimate is free and the written price is set before we start.
Rotary sweeping for stubborn creosote
Glazed creosote bonds to the flue wall and a hand brush skips right over it. Rotary equipment with the right head breaks that layer down without gouging the tile.
If the deposits are too thick for sweeping alone, we’ll tell you, and HeatShield or a DuraFlex liner becomes the conversation.
Wood stoves and inserts
Stoves and inserts have their own flue paths, baffles and connectors, and they foul differently from an open fireplace. We pull what needs pulling and sweep the full run, not just the visible throat.
Olympia Chimney and Copperfield components come up often on these jobs when a connector or cap needs replacing.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning
Chimney Cleaning is the broader job: soot removal plus the handling of what a sweep turns up, from a cracked tile to a rusted damper. You need it when you burn more than a cord a season, when the fire smells smoky even with the damper open, or when it’s been more than a year since anyone looked. Greensboro Chimney Cleaning cleans the firebox, smoke shelf, damper and flue as one system because that’s how they fail – together. Cleaning typically runs $150 to $280 in the Greensboro market, higher when the flue is heavily loaded or the roof access is awkward. The written estimate gives you the final number.
What comes out of a Greensboro flue
Hardwood leaves a drier, flakier soot than pine, but the creosote is what matters. Our Piedmont burn season runs long enough that a mid-winter fire can build a real layer before spring.
We bag everything and leave the room as we found it. No soot on the hearth, no dust trail through the house.
Cleaning versus inspection
Cleaning removes the hazard; inspection tells you whether the system can be used safely afterward. We do both, which means one visit instead of two contractors arguing over the same flue.
A camera inspection and photo report are included so you can see the flue for yourself.
Fireplace Cleaning
Fireplace Cleaning focuses on the firebox, hearth, glass, grate and the smoke chamber above the damper – the parts you actually look at and touch. It’s due when ash has built up past the grate, when the glass on a door is hazed, or when the firebox brick has that dark, gummy sheen that means the fire isn’t drafting cleanly. Greensboro Chimney Cleaning scrapes and brushes the firebox, clears the smoke shelf, and cleans doors and glass on units that have them. Fireplace cleaning generally falls in the $130 to $250 range in Greensboro, with inserts and gas units priced by what’s involved. You’ll see the quote in writing first.
Smoke chamber and damper
The smoke chamber is the sloped transition above the damper, and it collects soot faster than the flue does. A blocked shelf pushes smoke into the room on every lighting.
We check the damper plate and its frame while we’re there and note anything that’s sticking or warped.
Ash removal and hearth care
We remove ash and leave the hearth clean, and we’ll tell you if the firebrick joints need repointing. Small mortar gaps widen with heat cycles, and catching them early is cheaper than rebuilding a firebox.
Chimney Services
Chimney Services bring sweeping, inspection and repair under one provider, so the company that finds a problem is the same one that fixes it. You need that when you’re not sure whether the issue is a dirty flue, a failing liner or a cracked crown – all three produce similar symptoms from the living room. Greensboro Chimney Cleaning inspects with a camera, photographs what it finds, and then quotes the repair separately from the sweep. Repair work is priced by the job, from a crown patch to a full reline, and the written estimate sets the total. Sweeps run $150 to $280; repairs are quoted after inspection.
Repair after the inspection
A chimney crown with a hairline crack lets water into the masonry, and water is the slow killer of brick chimneys. We seal, patch or rebuild as the damage requires.
Liner replacement is the larger job. HeatShield resurfacing can save an otherwise sound flue without a full tear-out.
Why we carry professional-grade brands
Copperfield and Famco components come through professional supply channels, not big-box retail shelves. That’s the difference between a cap that lasts and one that rusts through in two seasons.
Whether you have DuraFlex, Gelco or Olympia Chimney equipment, we know how it’s built and how to work with it.
Chimney Sweep Certified
Chimney Sweep Certified means the technician performing the work is trained to sweep, inspect and interpret what the flue shows, and you want that whenever anyone touches your chimney. Greensboro Chimney Cleaning sends technicians who have up to 11 years of experience with wood-burning fireplaces, inserts and fuel-burning appliance venting, and who work from the same professional standards on every Greensboro job. Certification matters most at the point where a sweep becomes a decision: a trained eye distinguishes normal wear from a liner that’s genuinely failing. Sweeps and inspections are $150 to $280, with repairs quoted separately. Estimates are free.
Why certification affects what you pay
An untrained sweep misses glazed creosote because the brush passes over it cleanly. You pay once for a proper job rather than twice for a repeat visit plus a liner.
Ask for the camera images. If the technician can’t show you the flue, that’s your answer.
Liability and documentation
A sweep report that records the flue’s condition is worth keeping. It documents the state of the chimney for your records and for any future insurance question.
We leave you with that report, with photos, every time.
Gas Fireplace Cleaning
Gas Fireplace Cleaning removes the dust, soot and oxide film that collect on gas logs, burners and glass, and restores a clean, even flame. It’s needed when the flames have gone yellow or lazy, when the glass is clouded, or when dust and pet hair have settled across the burner ports – and in Greensboro homes with sealed gas units, once a year is the usual rhythm. Greensboro Chimney Cleaning cleans burners, logs, glass and the venting path, and checks that the draft is behaving. Gas fireplace cleaning typically runs $130 to $240, priced by the unit and how much access the log set allows. The written estimate sets the cost.
Burner ports and flame color
Clogged ports starve the burner and the flame goes orange where it should be blue. That’s a sign the gas is not combusting cleanly, and cleaning usually corrects it.
Any smell of gas with the unit off is a stop-and-call situation. Do not run it, and call your gas utility.
Venting and glass care
Gas units vent differently from wood, and the path shows its own kind of deposit. We check the vent and the draft while the glass is off.
Glass gets cleaned with products meant for it. Household cleaners etch the surface permanently.
Chimney Maintenance
Chimney Maintenance is the routine care that keeps the system working between sweeps: checking the cap, the crown, the flashing and the damper, and catching small failures before they cost real money. It’s needed every year in a home where someone burns, and it’s the single cheapest thing you can do for a chimney in Greensboro’s climate – wet winters and hot, humid summers are hard on masonry. Greensboro Chimney Cleaning folds maintenance into the annual visit so nothing is checked in isolation. Sweeps run $150 to $280; repair items found during maintenance are quoted separately in writing. Estimating is free.
The annual check that saves money
Water is the main threat to brick chimneys, not fire. A failed crown or a cracked flashing joint lets it in, and a freeze splits the brick.
We check those points every visit and report them plainly. If a repair can safely wait, we say so.
Cap and crown upkeep
A missing or damaged cap lets rain, birds and squirrels into the flue. Replacing one is inexpensive next to what a nesting squirrel costs in flue damage.
Brands We Service
DuraFlex liner systems are a flexible stainless option for relining, and we know where those systems wear – the top plate, the connector joints and the point where the liner meets the appliance collar. HeatShield resurfacing products are a different approach, restoring a damaged flue from the inside rather than inserting a new one, and we assess which route a given flue actually needs rather than defaulting to one. Gelco components come up on caps and accessory work, and Olympia Chimney on venting and stove-related parts. Copperfield and Famco supply the professional-grade hardware we install on repair jobs, and those parts hold up where consumer-grade versions don’t.
Our work isn’t tied to one maker’s catalog. We meet a chimney on its own terms and use what fits the flue in front of us. Whether you have DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco or Copperfield equipment, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling into the room. A fire that back-drafts on every lighting usually has a blocked flue or a smoke shelf packed with soot. It won’t clear with a hotter fire, and it puts carbon monoxide risk in the room with you.
- A strong creosote smell in warm weather. That smell means deposits are present and the flue is drawing humid summer air back down through them. It’s the clearest early signal that a sweep is overdue.
- Black, gummy staining around the firebox. This points to creosote buildup or a draft problem rather than a cosmetic issue. Both deserve a look before the next burn.
- Visible cracks in the firebox brick or mortar joints. Heat and moisture open mortar gaps wider, and gaps let heat reach the structure behind. Repointing early is far cheaper than a firebox rebuild.
- Water stains on the ceiling near the chimney or rust on the damper. Both mean water is getting past the crown or flashing. Rust on a damper can seize it shut, and masonry that stays wet breaks down through freeze cycles.
Our Process, Step by Step
- 1
We talk through the system first. What you burn, how often, whether there’s an insert or a stove, and what you’ve noticed about the draft. That conversation decides the scope of the visit before anyone opens a tool bag.
- 2
We protect the room, then set up. Drop cloths on the hearth and floor, and a sealed vacuum running through the sweep. Soot travels, and containing it is the difference between a clean room and a week of dusting.
- 3
We sweep the full flue with rotary equipment. Top to bottom, including the smoke chamber and shelf. Deposit depth determines which head we use, and glazed creosote gets the treatment it needs rather than a pass-over.
- 4
We run a camera inspection and photograph the results. The flue, the liner joints, the crown and the cap all get looked at. You see the images, and you keep the report.
- 5
We quote anything that needs fixing in writing. Separately from the sweep, with a clear note on what’s urgent and what can safely wait. No pressure to approve work on the spot.
How Much Does Chimney Sweep Cost in Greensboro?
A typical chimney sweep in Greensboro runs $150 to $280, depending on flue length, deposit depth and whether the chimney serves an open fireplace or a stove. A standard single-flue sweep with a camera inspection tends to land at the lower end. Heavily loaded flues, awkward roof access, or a job that includes an insert come in higher. Gas fireplace cleaning generally runs $130 to $240. Fireplace cleaning of the firebox, glass and smoke chamber sits around $130 to $250. Repair work is quoted separately once the inspection shows what’s actually needed.
What affects the price: the length and configuration of the flue, how much creosote has built up, roof pitch and access, whether the chimney has multiple flues, and whether the appliance is a stove or insert with its own connectors. A flue that hasn’t been swept in several seasons costs more than one on an annual rhythm, because the deposit is heavier and takes longer to break down.
How to avoid overpaying: get the price in writing before work starts, ask for the camera images, and be suspicious of any quote for a liner or masonry rebuild that comes without photographic evidence. Nothing we recommend goes beyond what the camera shows you, and we say plainly when a repair can safely wait until the following season.
Every estimate is free, and the written estimate is what sets the final price. Call (888) 366-5537 for an exact quote.
Our Service Area Near Greensboro
We work across Greensboro and the towns around it: Summerfield, Jamestown, Forest Oaks, Pleasant Garden, Oak Ridge, Stokesdale, Kernersville, Archdale, Gibsonville, Elon and Trinity. That covers a wide ring, from the older brick chimneys near the center of Greensboro out to newer construction on larger lots. Response times depend on where you are and what’s booked ahead of you, so call and we’ll give you a real answer rather than a guess. For homes in Summerfield or Oak Ridge, a chimney sweep visit can usually be scheduled alongside a Greensboro booking, and Jamestown homeowners can reach us through the chimney sweep page as well.
Serving Greensboro, NC – Our Local Coverage Area
We serve Greensboro and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Sweep in Greensboro
A chimney sweep is the service that removes soot, creosote and debris from a flue, firebox and smoke chamber so the chimney vents safely. It’s mechanical cleaning, done with rotary brushes and a sealed vacuum, followed by an inspection of what the cleaning revealed. In Greensboro, that means handling the creosote a full hardwood burn season leaves behind. Call (888) 366-5537 for an exact quote – estimates are free.
A standard single-flue sweep takes roughly 45 minutes to an hour and a half, including setup, sweeping and the camera inspection. Chimneys with heavy deposit, multiple flues or an insert can run longer. We don’t rush the inspection, because that’s where the useful information comes from. Call (888) 366-5537 to book a time.
Chimney sweeps in Greensboro typically run $150 to $280, with the final figure depending on flue length, deposit depth and access. Gas fireplace cleaning sits at $130 to $240, and fireplace cleaning at $130 to $250. Repairs are quoted separately in writing after the inspection. Call (888) 366-5537 for an exact quote – estimates are free.
Yes. We work with Olympia Chimney venting components and DuraFlex liner systems, along with HeatShield resurfacing, Gelco, Famco and Copperfield parts. That familiarity matters on relining and restoration work, where the brand determines how the system comes apart and what replacement parts fit. Bring the model details if you have them. Call (888) 366-5537 to talk it through.
Same-day appointments are often available, depending on the day’s schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (888) 366-5537.
Warranty terms vary by the work performed and the materials used, so we put them in writing on the estimate rather than quoting them over the phone. Liner and repair work carries terms set by the product manufacturer and the scope of the job. Ask before you approve anything. Call (888) 366-5537 for the specifics.
Clear the hearth area and a path to it, and move anything breakable off the mantel. Don’t light a fire for at least 24 hours before the visit, so the firebox is cool and the ash has settled. Have the model details for any insert or stove on hand, and tell us if the damper is sticking. Call (888) 366-5537 to schedule.
Schedule Your Chimney Sweep Service in Greensboro Today
One call covers the sweep, the inspection and any repair that follows, with professional-grade materials and a camera report you can see for yourself. Call (888) 366-5537. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation. Book your chimney sweep in Greensboro before the next burn season starts. For related work, see our chimney repair and chimney inspection pages, or start at Greensboro Chimney Cleaning; a chimney sweep is the simplest place to begin.
Written by the team at Greensboro Chimney Cleaning.