Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Reidsville
If your chimney is letting water in, smoking into the room, or showing loose brick at the top of the stack, we can help. We’re Greensboro Chimney Cleaning, and we handle chimney repair for Reidsville homeowners from the first inspection through the final repair, using professional-grade materials from HeatShield, Gelco, and Olympia Chimney. Our technicians have up to 11 years of experience. Call (888) 366-5537 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Reidsville Homeowners Call Greensboro Chimney Cleaning for Chimney Repair
Reidsville houses are dense and old. Walk the mill-village blocks near downtown and you’ll see the same thing over and over: tall exterior brick stacks, original fireplaces, and mortar that has been soaking up Piedmont humidity for a century. That’s where most of our Reidsville work lives. We aren’t arriving to a modern home with a stainless liner already in place. We’re arriving to a 1920s brick chimney that has never been relined and is still the main source of winter heat in the house.
We get called back to Reidsville because we tell you what’s actually wrong and put a camera in front of it. If the flue is clean and the crown is cracked, we show you the crown. If the crown is fine and a clay tile has failed, we show you that instead. And when repair work can safely wait until spring, we say so. That honesty is why referrals travel block to block in the mill-village neighborhoods, where neighbors talk about whose chimney got fixed and whose didn’t.
Our technicians have up to 11 years of experience working on the materials these houses need: HeatShield for restoring a sound original flue, DuraFlex for relining it, and Gelco and Olympia Chimney for liners, caps, and components sized to the appliance that actually runs in your house. One call covers the sweep, the inspection, and the repair, so you aren’t juggling three contractors who each blame the other for the smoke.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement in Reidsville
Chimney Cap Replacement in Reidsville often isn’t about the cap itself but about what the cap was supposed to protect. On a wind-exposed exterior stack, a missing, bent, or undersized cap means every hard rain goes straight down the flue, and every gust off the west pushes water past whatever seal is left. A proper stainless cap sized to the flue and the flue tile keeps water out and keeps birds and squirrels from nesting in the stack. When a Reidsville cap has rusted through or blown off in a storm, we cut a new one to fit.
Sizing to the flue, not the box
A cap that fits the chimney box but sits a half inch too small on the flue tile still lets water and animals in. We measure the actual opening and set the cap so the flue tile is fully covered.
Storm and impact damage
Hail is uncommon here, so most of the cap damage we see in Reidsville comes from wind-borne limbs and debris rather than falling ice. If a branch with an impact has cracked the masonry below the cap, that repair gets quoted alongside the cap replacement.
Chimney Liner Installation in Reidsville
Chimney Liner Installation in Reidsville is the repair that most century-old houses here eventually need, and it’s the one we get asked about most. A clay-tile flue from 1930 may look intact from the firebox but have cracked joints higher up. Once the joints open, smoke and carbon monoxide can move into an adjacent flue, and in a mill-village duplex or attached house that means a neighbor’s exhaust finding its way into your room. A liner sized to the appliance closes that path and gives the flue a smooth, continuous interior. We install DuraFlex stainless liners and HeatShield restoration systems, and we size the liner to the stove, insert, or fireplace that actually runs in your house.
When relining beats rebuilding
If the original brick shell is sound but the tile inside is failing, a liner saves the chimney. Rebuilding the whole stack is the better answer only when the brick itself has structurally failed.
Sealing a shared-stack path
In dense attached housing, we check every flue opening in the stack, not just yours. A failed damper or an old thimble that was never properly capped can let smoke back through, and we seal those before we finish.
Trusted Brands We Service in Reidsville
We work with professional-grade product lines that specialize in chimney systems: HeatShield for flue restoration, DuraFlex for stainless liners, Gelco for insulation, and Olympia Chimney for caps and liner components. Those brands are supplied through professional channels, not the big-box aisle, and they’re built to fit the actual flue geometry in an older house rather than a modern production box. On a Reidsville reline or crown rebuild, we’re specifying components sized to the appliance and the age of the stack. When a part is needed, we order it from the supplier and schedule the install rather than improvising with a universal fit. Call (888) 366-5537 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Reidsville Homes
- Cracked chimney crown and spalling mortar wash. Reidsville’s tall exterior stacks take the west wind head-on, and the top of the chimney is where the damage shows first. The crown cracks, water gets in, and the mortar wash crumbles loose. Homeowners often arrive convinced they have a creosote problem when the flue is actually clean.
- Clay-tile or unlined flues in century-old fireplaces. Many mill-era Reidsville houses never had a reline, and the original tile has cracked joints. In dense attached housing those joints let smoke and carbon monoxide migrate into a neighboring flue.
- Fireplaces reopened without a Level 2 inspection. Older rentals and flips here had fireplaces sealed, converted, then burned again by a new owner. Blocked or undersized flues and rusted-out dampers are what we find when someone asks why the fireplace smokes.
- Spalling brick from Piedmont summer humidity. Reidsville’s humid summers soak the brick and the freeze-thaw winters crack it. The defect builds slowly through the season and shows up after the first hard freeze.
Pricing for Chimney Repair in Reidsville, NC
We set the price per job with a written estimate after inspection, and the estimate is free. Typical repairs in Reidsville run roughly $250 to $600 for crown repair and repointing, $150 to $450 for flashing repairs, and $1,200 to $3,500 for a stainless liner install depending on the flue length and the appliance. A full rebuild on a tall exterior stack is the highest-cost job, and we quote it line by line so you can see what’s structural and what can wait a season. The written estimate sets the final price. Nothing gets added after the fact, and if the camera says the work isn’t needed yet, we tell you that too. Call (888) 366-5537 for a free estimate.
We Also Serve Cities Near Reidsville
Our chimney repair team also works in Wentworth, Summerfield, Stokesdale, and Gibsonville, so if a relative or a rental sits in one of those towns, the same inspection and repair service covers it. If you’re in Reidsville, our Reidsville service area page covers the neighborhoods we reach most often. For the full range of work, see chimney repair.
Serving Reidsville, NC – Our Local Coverage Area
We serve Reidsville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Reidsville
Yes, and in shared-stack attached housing it’s a common source of the problem. Cracked clay-tile joints, a failed damper, or an old thimble that was never capped can let a neighbor’s exhaust or smoke travel into your flue. We inspect every opening in the stack, not just yours. Call (888) 366-5537 for an inspection and a free estimate.
Because in Reidsville the defect is usually at the crown, not in the flue. On the tall, wind-exposed exterior stacks common to mill-era homes, the crown cracks and the mortar wash crumbles while the flue stays clean because the fireplace is rarely used. The camera shows you the crown and you decide. Call (888) 366-5537 for a free estimate.
Usually, yes. If the original brick shell is sound, a HeatShield restoration or a DuraFlex stainless liner gives the flue a continuous interior without rebuilding the stack. A rebuild is the right call only when the brick itself has failed. Call (888) 366-5537 for a free estimate.
Once a year, even if you barely use it. Water from a cracked crown and the freeze-thaw cycle do more damage here than creosote does. A yearly Level 2 inspection catches a failing crown and spalling mortar before it becomes a rebuild. Call (888) 366-5537 for a free estimate.
It starts with a Level 2 inspection, because a sealed or converted fireplace is a blank slate and the flue may be blocked, undersized, or rusted out at the damper. The repair plan is sized to what’s actually in the stack, not to what was there before the seal. Call (888) 366-5537 for a free estimate.
Written by the team at Greensboro Chimney Cleaning.