Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Greensboro?
Chimney cap installation in Greensboro typically costs $180 to $550, and crown repair or replacement usually runs $350 to $1,200 depending on the damage and the crown material. A custom cap for an unusual flue size sits at the top of that range, and a full crown rebuild on a masonry chimney is the largest single line item. Most jobs are quoted per chimney after an inspection, and the written estimate you receive sets the final price.
We handle caps and crowns as part of the whole chimney system, not as a quick add-on. We inspect it, we repair it, and the same team that finds the problem fixes it. Our technicians have up to 11 years of experience, and we work with professional-grade brands including Copperfield and Famco for caps and components.
Chimney Cap & Crown Cost Breakdown (2026)
These are typical estimated ranges for the Greensboro market in 2026. Every chimney is sized and damaged differently, so treat these as a starting point for budgeting and confirm with a written estimate.
| Line Item | Typical Estimated Cost |
|---|---|
| Standard single-flue cap (stock size) | $180 – $350 |
| Multi-flue or custom-size cap | $350 – $550 |
| Cap with mesh spark screen | $220 – $420 |
| Crown seal (minor cracks, coating only) | $350 – $650 |
| Crown rebuild or replacement (masonry) | $700 – $1,200 |
| Crown and cap combined job | $550 – $1,600 |
| Inspection to confirm what’s needed | Free estimate |
A few things push the number up or down. Custom flue sizes where a standard cap won’t fit mean fabrication work, which costs more than pulling a stock size off the shelf. A crown that only has hairline cracks can often be sealed and coated rather than rebuilt, and that’s the cheaper path. A crown that has separated from the flue, lost its overhang, or crumbled to the point where water is running down the masonry needs a rebuild, and that’s where you land near the top of the range. Access matters too: a steep roof pitch or a tall chimney slows the job down. We price each job on its own merits and put it in writing before any work starts.
One thing we’d flag: a cheap cap that doesn’t fit right can rattle in wind and let water in at the seams. The cost of doing it once with a properly sized Copperfield or Famco component is usually less than replacing a poor fit two seasons later.
What Affects Chimney Cap & Crown Pricing in Greensboro
Greensboro’s weather does a lot of work on a chimney crown. The Piedmont gets hot summers, repeated free-thaw cycles in winter, and heavy summer thunderstorms. A concrete crown expands and contracts with every swing, and hairline cracks open up quietly over a few seasons. That pattern is the main reason crown work comes up so often here.
- Flue size and shape. Standard round or square flues take a stock cap. Oversized, oval or unusual flues need a custom-fabricated cap, and that adds to the price.
- Crown condition. Sealing existing cracks is a smaller job. Rebuilding a crown means removing the old material, forming a new sloped crown, and curing it correctly, so it costs more.
- Number of flues. A chimney with two or three flues needs a multi-flue cap or several individual caps, and the material and labor both go up.
- Roof access and pitch. A steep roof, a tall stack, or tight roof clearance makes the setup longer, and labor is the biggest variable in any chimney job.
- Masonry condition. If water has already gotten behind the crown and into the brick, tuckpointing or masonry repair may be needed before a new crown can go on. We’ll tell you honestly if that’s the case rather than crowning over a failing structure.
- Material choice. A cast crown lasts longer than a simple mortar wash, but it costs more upfront. We’ll walk through the trade-off so you can decide what fits your budget and how long you plan to stay in the home.
Why a Cap and Crown Matter for Your Chimney System
A cap and a crown do different jobs, and a chimney needs both working together. The cap sits on top and keeps rain, snow, birds, squirrels, and debris out of the flue while letting smoke and gases escape. The crown is the concrete or masonry surface at the very top of the chimney that sheds water away from the brick. When the crown cracks, water gets into the masonry, freezes, and pushes the brick and mortar apart. When the cap is missing or damaged, water drops straight down the flue, and animals move in.
We treat the flue, liner, cap, and crown as one system. If we’re up there replacing a crown and we see the liner is cracked or the cap was never fitted right, we’ll flag it. Safe draft and a clean burn depend on the whole stack being sound, not just the parts you can see from the driveway. If a closer look turns up liner damage, that’s where our work with Greensboro Chimney Cleaning lines up – we handle relining with DuraFlex and HeatShield systems, so the fix stays with the same provider that inspected it.
Caps and crowns are also the most common reason a chimney repair quote changes once we’re on the roof. What looks like a small crack from the ground can be a crown that’s separated from the flue. We’d rather find that out before we start than surprise you halfway through.
Can You Replace a Chimney Cap the Same Day?
Yes, in most cases. A standard cap replacement is a single-visit job, usually a couple of hours once the right size is confirmed. If the cap needs to be custom-fabricated for an unusual flue, expect a short wait for the part to arrive. We’ll tell you at the estimate which one you’re looking at.
Same-day crown sealing is often possible too. A full crown rebuild usually takes a return visit because the new crown has to be formed and allowed to cure properly. Rushing that step is how crowns fail early, so we don’t cut it short. If it’s a project that needs a couple of trips, you’ll know up front.
If your cap came off in a storm or a bird got into the flue, call (888) 366-5537 and we’ll get you on the schedule. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
How to Save on Chimney Cap & Crown in Greensboro
The biggest savings come from catching crown damage early. A $350 to $650 crown seal now is a lot less than a $700 to $1,200 crown rebuild later, and far less than masonry repair underneath it. Here are the practical moves that actually reduce the bill:
- Get a free estimate before anything is ordered. We confirm the flue size and crown condition first, so you’re not paying for a cap that doesn’t fit or work that isn’t needed.
- Combine the cap and crown in one visit. If both need attention, doing them together saves on setup and labor.
- Address cracks while they’re still hairline. Sealing beats rebuilding every time.
- Ask what caused the damage. If a cap was missing for years, the water damage underneath may need tuckpointing too, and knowing the full scope up front keeps the estimate honest.
- Look at material lifespan, not just price. A cast crown or a properly fitted professional-grade cap costs a bit more but usually outlasts a cheap version and avoids a repeat visit.
We don’t pad estimates and we don’t sell work a chimney doesn’t need. When you call for a free estimate, we’ll tell you what’s actually going on and give you options at different price points where they exist. Call (888) 366-5537 to book one.
How Do You Choose a Chimney Cap and Crown Contractor in Greensboro?
Ask what brands they work with and whether they handle repair as well as installation. A contractor who only installs caps may miss crown or liner problems that need a specialist. We work with a portfolio of recognized industry brands – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – which means we can source the right components for your specific flue rather than forcing a one-size cap onto it.
We also handle all three core services: chimney sweeping, chimney inspection, and chimney repair. That matters for a cap and crown job, because the inspection tells us what shape the rest of the system is in, and the repair side means the same provider fixes what the inspection found. You’re not coordinating a cap installer, a mason, and a sweep separately.
Ask for the estimate in writing, ask what happens if more damage turns up, and ask how the work will be sealed and finished. If a contractor can’t answer those clearly, that’s your answer. Homeowners in Greensboro have plenty of choices; the ones worth hiring will explain the system, not just quote a price.
What’s the Difference Between a Chimney Cap and a Chimney Crown?
The cap is the cover on top of the flue, and the crown is the concrete or masonry surface at the top of the chimney that sheds water. They’re two separate parts with two separate jobs, which is why they’re priced separately. A cap protects the flue opening. A crown protects the masonry structure. You can have a perfect cap and a failing crown, and water will still find its way into the brick.
When we look at a chimney, we check both. A missing or rusted cap and a cracked crown often show up together, since both are exposed to the same weather. If your cap is fine but the crown is cracked, you don’t necessarily need a new cap, and vice versa. That’s the value of getting eyes on the whole stack before quoting.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Greensboro?
A standard chimney cap in Greensboro typically costs $180 to $350 for a single flue, and $350 to $550 for a multi-flue or custom-size cap. The price depends on flue size, material, and whether mesh screening is included. Call (888) 366-5537 for an exact quote – estimates are free.
How much does chimney crown repair cost in Greensboro?
Chimney crown repair in Greensboro usually runs $350 to $650 for sealing and coating minor cracks, and $700 to $1,200 for a full crown rebuild. Catching cracks early keeps you in the lower range. Call (888) 366-5537 for a free estimate on your crown.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the damage is limited to hairline cracks, at $350 to $650 versus $700 to $1,200 for a rebuild. Once the crown has separated from the flue or lost its slope, a rebuild is the only fix that lasts. Call (888) 366-5537 and we’ll tell you which one your chimney needs.
How often should a chimney cap be replaced?
Most caps last many years, but rust, wind damage, or animal activity can shorten that. If you see rust holes, a loose fit, or a missing mesh screen, it’s time for a replacement, typically $180 to $550 in Greensboro. Call (888) 366-5537 to have it checked during a free estimate.
Can a bad chimney crown cause water damage?
Yes. A cracked or crumbling crown lets water into the masonry, and Greensboro’s freeze-thaw cycles then push the brick and mortar apart, which turns a $350 to $650 seal into a masonry repair that costs more. The earlier you catch it, the less you spend. Call (888) 366-5537 to schedule a free estimate.
Can you come today for a cap or crown?
Same-day service is available for many cap and crown jobs. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (888) 366-5537.
Get a Free Estimate on Your Chimney Cap and Crown
A cap and crown are small parts of your chimney, but they’re the first line of defense against water, animals, and freeze damage. If you’re not sure what shape yours are in, get it checked before the next storm season. We inspect it, we repair it, and one call covers sweep, inspection, and repair. Our technicians have up to 11 years of experience, and we work with professional-grade materials from brands chimney specialists trust. Call (888) 366-5537 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Greensboro market as of 2026. Greensboro Chimney Cleaning offers free estimates – call (888) 366-5537.
Written by the team at Greensboro Chimney Cleaning.
What Our Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Aisha Nash"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Kurt Quinn"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Emily Rhodes