Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Burlington, NC
Most chimney calls in Burlington start with a question we hear at the door: “Does this really need work, or is someone just selling me a liner?” We answer that with a camera and a written report, not a sales pitch. This page covers how we handle chimney inspection here, and why Burlington chimney jobs look different from Greensboro’s. The short version: half the stock is early-1900s mill housing with clay tile flues, the other half is rural-edge homes burning wood as serious heat. Both need inspecting on their own terms. Call (888) 366-5537 for a free estimate.
Why Burlington Homes Are Different
Burlington sits where the old textile-mill economy meets Alamance County farmland, so a lot of the chimneys we look at sit in early-1900s mill housing with clay tile flues that have been quietly cracking for many years, and the rest serve rural-edge homes where wood is primary heat rather than décor. Those two groups get different problems.
In-town, off the 27217 side, we routinely find flues that were shared between original fireplaces or partly hidden when a later renovation closed off a hearth. You can’t sweep or inspect what nobody knows is there, which is why a level 2 inspection matters more in these houses than the age of the brick suggests. Out toward the county line, the chimney that matters is the one under steady winter load.
The Piedmont climate does the rest. Muggy summers leave fireplaces idle for months, so nests, moisture damage and spalled mortar show up as spring discoveries, and creosote from fall and winter burning often hardens to a glazed shell before anyone gets around to booking a sweep.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Burlington Services
Two services account for most of the calls we take in Burlington: sweeping out what a season of burning left behind, and repairing the flue, crown or firebox problems that show up once we’re inside the system.
Chimney Sweep in Burlington
A sweep here means more than running a brush up a clay tile flue. We work clear of the firebox, run the brush line to the top, and pull down the creosote that glazed hard over a cold snap. In older mill housing, that often means checking whether a second flue runs behind the one we can see before we call the job finished. Rural-edge homes burning seasoned hardwood for heat need the sweep on a schedule, not a mood, because their insurance carrier wants a record. Book a chimney sweep and we’ll leave the flue, smoke chamber and damper area clean, with the soot contained and the room as we found it.

Chimney Repair in Burlington
Repair work in Burlington usually falls into one of three piles: spalled mortar and cracked clay tile in the older masonry, a crown that has pulled away and is letting water in, or a prefab insert install that was never quite finished right. We look at the whole system before we quote, because a crown problem and a flue problem often share a cause. Where the damage runs deeper than patching, we reline rather than rebuild, using HeatShield or DuraFlex systems sized to the appliance. Request chimney repair and you’ll get the scope in writing before anyone touches the chimney.

Chimney Inspection in Burlington

Chimney inspection in Burlington is where most of the real information gets gathered, because the housing here hides problems that a sweep alone won’t reveal. Early- to mid-1900s mill-village and bungalow stock around the old textile plants, plus the 1950s to 1970s brick ranches, commonly carries original or barely used masonry fireplaces with clay tile flues that crack and spall, and a growing share now holds older prefab or insert installs. Add a humid Piedmont climate that keeps fireplaces idle most of the year, and you get nests, moisture damage and spalled mortar as routine finds. Our Chimney Inspection is done with a camera, and the findings are yours to see on the screen.
Fireplace Inspection
Signs you need it
You’re buying or selling a Burlington home, or the fireplace has sat unused long enough that you can’t remember the last time anyone looked at the firebox, damper or smoke shelf.
What it costs in Burlington
A standard inspection runs about $150 to $275, and a camera-assisted assessment with a written report is typically $200 to $400, with the written estimate setting the final price.
How we do it
We examine the firebox, damper, smoke chamber and flue from below, run a camera up the flue where the layout calls for it, check the crown and cap from outside, and document what we find with photos so you can follow along.
Chimney Flue Inspection
Signs you need it
Smoke rolls back into the room on light-up, the draft feels weak, or you’ve had a chimney fire and need the flue checked for cracked tiles and glazed creosote before burning again.
What it costs in Burlington
Flue-specific camera inspection typically falls in the $200 to $400 range, and if it turns into a level 2 assessment with video documentation, expect roughly $250 to $500, with the written estimate setting the final price.
How we do it
We push a camera up the full run of the flue, note offsets, tile cracks, gaps at the mortar joints and any glazed creosote, and record the footage so you have a record of the flue’s actual condition.
What Chimney Inspection Costs in Burlington
What you pay depends on how far into the system we need to look and whether the findings need documenting for a lender, insurer or buyer.
| Item | Typical range in Burlington |
|---|---|
| Standard chimney inspection | $150 – $275 |
| Camera-assisted inspection with written report | $200 – $400 |
| Level 2 inspection with video documentation | $250 – $500 |
Can you inspect a Burlington chimney in a mill house with a hidden or shared flue?
Yes. We trace the flue run with a camera and check from the roof and the firebox before advising, because hidden or shared flues in older Burlington housing need mapping before any sweeping or repair work begins.
Does a Burlington inspection come with photos I can keep?
Yes. The camera findings are documented and shared with you, so nothing is recommended without evidence you can look at yourself, and work that can safely wait is said plainly.
Brands We Service in Burlington
We work with HeatShield, DuraFlex, Gelco, Olympia Chimney, Famco and Copperfield, which matters most when a repair needs a liner or a component matched to your appliance rather than whatever the shelf holds. Parts come through professional supply channels, so turnaround depends on the job and is confirmed in your written estimate. See our brands for the full list.
Pricing for Chimney Company in Burlington, NC
| Service | Typical range in Burlington |
|---|---|
| Standard chimney inspection | $150 – $275 |
| Camera-assisted inspection with written report | $200 – $400 |
| Level 2 inspection with video documentation | $250 – $500 |
| Chimney sweep | $180 – $320 |
| Sweep with camera check | $220 – $395 |
| Chimney crown repair | $250 – $700 |
| Masonry and mortar repair | $300 – $1,200 |
| Chimney cap installation | $175 – $450 |
| Flue relining | $1,800 – $4,500 |
In Burlington, three things push price up most: a hidden or shared flue that has to be traced before anything else can happen, water damage behind spalled mortar that turns a patch into a rebuild section, and a reline sized for a wood stove running as primary heat. The written estimate sets the final price, and you get it before any work is booked.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Burlington
Burlington’s chimney work breaks along the line the town’s history drew, between the in-town mill neighborhoods and the rural edge where wood is the main heat. We cover both, and the drive time between them is short enough that scheduling rarely depends on where you sit in the county.
- The mill-village streets on the 27217 side, where shared and hidden flues show up
- Bungalow and brick ranch blocks closer to downtown Burlington
- Rural-edge homes off the county line burning seasoned hardwood for heat
- The 27215 corridor, with a mix of original masonry and older insert installs
Response across Burlington is generally straightforward; a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Service Area – Cities Near Burlington
Burlington sits central enough that we also take calls from the towns around it. If you’re just outside the city limits, the same inspection and sweeping standards apply, and the local conditions – clay tile flues, idle summers, steady winter burning – travel with you. We also work in Elon, NC, Glen Raven, NC, Gibsonville, NC and Forest Oaks, NC, and we’ll tell you plainly if your address falls outside what we cover.
Serving Burlington, NC – Our Local Coverage Area
We serve Burlington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Burlington
Yes. We work in-town Burlington and the rural-edge homes toward the Alamance County line, and the 27215 and 27217 sides both get the same scope of service. Call (888) 366-5537 and we’ll confirm your address before booking.
Most cities require a permit for structural chimney work such as relining or significant masonry repair, so ask Burlington’s building department before the job is scheduled. If your neighborhood has an HOA, check whether a cap or chase change needs approval; we’ll work to whatever the written approval allows.
We book a sweep or inspection into the next open slot, and the seasonal rush before burning season fills fastest. Call (888) 366-5537. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Get a Free Chimney Estimate in Burlington
Whether your fireplace has sat cold for a few seasons or your insurance carrier wants a sweep record before closing, the first step is the same: an inspection that produces evidence you can see. We handle sweep, inspection and repair as one job under one provider, so the crew that finds the problem is the crew that fixes it. Call (888) 366-5537 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burlington Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Aisha Nash"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Kurt Quinn"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Emily Rhodes