Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Greensboro, NC
If you’re searching for a chimney company in Greensboro, NC, the first thing worth knowing is that this isn’t a sweep-and-go town. Greensboro’s older housing stock – mill houses and bungalows built before 1950 – means many chimneys here need real evaluation before anyone touches a brush. We handle Chimney Inspection, sweeping, and repair as one connected service, so the same company that finds the problem also fixes it. Call (888) 366-5537 to book an assessment of your chimney system.
Why Greensboro Homes Are Different
Greensboro’s chimney work is shaped by its era of construction. The dense grid of former textile-mill neighborhoods – Warnersville, Glenwood, and the streets off Bessemer and Freeman Mill – is full of pre-1950s brick bungalows and mill houses with century-old single-wythe brick chimneys. Many of those flues were never relined and now vent wood stoves and gas inserts instead of coal. That combination turns most jobs into relining and mortar-joint rebuilds, not routine cleaning.
The climate adds its own pressure. Greensboro’s humid summers and short but intense burn seasons drive heavy creosote accumulation, and the same moisture accelerates spalling and efflorescence on old exterior brick. In the old mill villages, chimney tops are often shared or step-walled between tightly packed houses, and technicians regularly find flues blocked by decades of soot, by brick knocked loose in past storms, or by the nests of chimney swifts that return each spring.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Greensboro Services
Two jobs account for most of the calls we take in Greensboro: annual sweeping and the repair work that older masonry so often needs.
Chimney Sweep in Greensboro
A proper sweep in Greensboro is a full-system cleaning, not a poke-and-run. Our technicians have up to 11 years of experience and work the flue from top and bottom, remove creosote at the stage it’s actually in, and check the firebox, damper, smoke chamber, and cap while they’re on the roof. In the old mill houses around Warnersville and Glenwood, that often means clearing soot and debris that has settled for a very long time. If the flue reads as unlined or damaged, we say so plainly before recommending anything. Book a chimney sweep and get a camera-checked cleaning.
Chimney Repair in Greensboro
Repair in Greensboro leans heavily toward masonry and relining. The single-wythe exterior chimneys common to pre-1950s bungalows crack at the mortar joints, lose their crowns, and spall when freeze-thaw cycles work on wet brick. When a flue is unlined or failing, we reline with HeatShield or DuraFlex systems suited to the appliance actually venting into it. We inspect it, we repair it, so nothing gets handed off. Ask about chimney repair for mortar-joint rebuilds, crown work, and flue restoration.
Chimney Inspection in Greensboro
A chimney inspection in Greensboro is the step that tells you whether your flue can safely vent what’s connected to it – and in this city’s pre-1950s mill houses and bungalows, the answer is genuinely in question more often than in newer suburbs. Coal-era fireplaces were never relined, and decades of wood stoves and gas inserts have been vented into those unlined flues since. Add Greensboro’s humid climate speeding up spalling and efflorescence on exterior brick, and an annual inspection becomes the cheapest insurance on the whole system. We inspect it, we repair it – one company, one accountability line.
Fireplace Inspection
Signs you need it
You’re seeing smoke roll into the room, a damper that won’t seat, or staining on the firebox brick around an insert that’s been venting into an old coal-era opening.
What it costs in Greensboro
A fireplace inspection here typically runs $125 to $250, and a Level 2 inspection with camera runs about $250 to $450.
How we do it
We check the firebox, damper, smoke chamber, and the appliance connection, photograph everything we find, and leave you with a written report of the system’s condition.
Chimney Fire
Signs you need it
Sign after a chimney fire includes a puffy, honeycombed creosote layer inside the flue, cracked tiles, a warped damper, or blackened mortar at the top of the chimney.
What it costs in Greensboro
Post-fire inspection and assessment typically costs $250 to $450, and if relining is needed, a HeatShield or DuraFlex installation generally runs $2,500 to $5,800 depending on the flue.
How we do it
We sweep what remains, run a camera the full length of the flue, and report on tile and mortar damage before recommending a liner – your written estimate sets the price.
What Chimney Inspection Costs in Greensboro
| Item | Typical range in Greensboro | |
|---|---|
| Standard chimney inspection (Level 1) | $125 – $250 |
| Level 2 inspection with camera | $250 – $450 |
| Post-chimney-fire assessment | $250 – $450 |
Do I need a Level 2 inspection in Greensboro?
You do if your home has changed hands, changed fuel source, or had a liner installed – all common in Greensboro’s older mill houses. A Level 2 inspection uses a camera to see the full flue.
Can you tell me if my old unlined flue is safe?
Yes. We run a camera through the full flue and show you what it holds, including past soot and masonry debris. Nothing gets recommended without evidence you can see.
Brands We Service in Greensboro
We work with professional-grade materials from brands chimney specialists trust – DuraFlex and HeatShield for liner and relining work, and Gelco, Olympia Chimney, Famco, and Copperfield for components and venting. These come through professional supply channels, not big-box shelves. See our brands for the full list, and we’ll source the right fit for your flue.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Greensboro, NC
| Service | Typical range in Greensboro | |
|---|---|
| Standard chimney inspection (Level 1) | $125 – $250 |
| Level 2 inspection with camera | $250 – $450 |
| Post-chimney-fire assessment | $250 – $450 |
| Chimney sweep | $150 – $300 |
| Chimney relining (HeatShield / DuraFlex) | $2,500 – $5,800 |
| Mortar-joint rebuild | $1,200 – $4,500 |
| Crown repair | $300 – $900 |
| Chimney cap installation | $150 – $450 |
What pushes price up in Greensboro is almost always access and condition: shared or step-walled chimney tops in the old mill villages take more careful setup, and unlined flues that need full relining rather than spot work cost more than a sweep. We give you an upfront, written price before any work begins.
Neighborhoods We Serve in Greensboro
We work across Greensboro, with extra familiarity in the older neighborhoods where the work is hardest. Response time depends on where you are and what’s booked, but we’ll give you a clear window when you call. Our technicians have up to 11 years of experience working on brick from all eras of this city’s housing stock.
- Warnersville
- Glenwood
- The streets off Bessemer and Freeman Mill
- West and north side ranch neighborhoods
- Downtown and the surrounding older blocks
Service Area – Cities Near Greensboro
Greensboro sits at the center of our work, and we also reach into the surrounding communities – Jamestown, NC, Forest Oaks, NC, Pleasant Garden, NC, and Summerfield, NC. Each has its own housing character, from older mill-adjacent stock to newer suburban builds, so the chimney work shifts with the address. Call and we’ll confirm coverage for your street.
Serving Greensboro, NC – Our Local Coverage Area
We serve Greensboro and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Greensboro
We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm, and we book you into the next opening. Timing depends on where you are and what’s scheduled, but we’ll give you a clear window when you call.
Most structural chimney work – relining or masonry rebuilds – requires a permit from the city, and some HOAs have their own rules on exterior changes. Ask your city’s building department and your HOA early, and we’ll work with what they require.
We cover Greensboro itself and the nearby communities listed above, including Jamestown, Forest Oaks, Pleasant Garden, and Summerfield. If you’re outside that footprint, call and we’ll tell you honestly whether we can reach you.
If your chimney hasn’t been inspected in a while – or if you’ve just moved into one of Greensboro’s older mill houses and don’t know what’s inside the flue – the right first step is a camera inspection, and we’ll show you exactly what we find. Call (888) 366-5537 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Greensboro Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Aisha Nash"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Kurt Quinn"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Emily Rhodes