Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Greensboro?
A chimney liner replacement in Greensboro typically costs between $2,400 and $5,600 depending on liner material, flue length, and whether the chimney needs structural work before a new liner can go in. A partial crown or firebox rebuild usually falls between $900 and $3,200, while a full chimney rebuild runs $6,000 to $14,000 or more when the stack has to come down to the roofline. Those are estimated ranges for the local market. The written estimate sets the final price.
Our technicians have up to 11 years of experience assessing flues, crowns, and fireboxes in homes across the area, and we work with professional-grade liner and restoration products from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. We inspect it, we repair it. One call covers sweep, inspection, and repair, so you’re not coordinating two or three contractors on a job that has to be sequenced correctly. Call (888) 366-5537 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A full liner replacement in Greensboro is estimated at $2,400 to $5,600, most of it labor and material for the flue length.
- A crown rebuild is the cheapest way to stop water damage before it reaches the liner, typically $900 to $1,800.
- A full chimney rebuild is a masonry and structural job, estimated $6,000 to $14,000, and it’s the option of last resort.
- Clay tile liners in older Greensboro homes crack, spall, and lose their joints over time. A cracked liner is a safety problem, not a maintenance item.
- Free estimates and upfront pricing. Call (888) 366-5537 for an exact quote on your chimney.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the work breaks down by line item, using estimated Greensboro ranges. Every chimney is different, so treat these as typical figures rather than a quote for your house. The written estimate you get after we look at the flue is the number that matters.
| Work Item | Estimated Cost Range | What It Covers |
|---|---|---|
| Flue inspection and video scan | $0 to $350 | Camera scan of the full flue, joint check, draft reading. Often bundled free with a cleaning or estimate. |
| Stainless steel liner (flexible, DuraFlex-style) | $2,400 to $4,800 | Liner, insulation wrap, top plate, cap, and installation over the full flue length. |
| Rigid stainless liner (sectional) | $3,200 to $5,600 | Preferred where the flue is straight; heavier-duty sections joined top to bottom. |
| HeatShield flue resurfacing | $1,600 to $3,400 | Restores cracked or spalled clay tiles from the inside when the flue doesn’t need a full liner. |
| Crown rebuild or replacement | $900 to $1,800 | New concrete crown with proper slope and overhang to shed water off the stack. |
| Firebox rebuild | $1,400 to $3,200 | Rebuilding damaged firebrick and mortar in the firebox with heat-rated materials. |
| Partial chimney rebuild (upper section) | $2,800 to $6,500 | Tearing down and rebuilding brickwork above the roofline, new flashing, new crown. |
| Full chimney rebuild | $6,000 to $14,000 | Full demolition and rebuild of the stack to the roofline with new masonry and liner. |
| Cap with animal screen (Famco, Copperfield) | $180 to $450 | Stainless cap and spark screen sized to the flue. |
What pushes a job toward the top of a range? Flue length is the biggest single driver – a tall two-story flue takes more liner and more time than a short one. The shape of the flue matters too: an offset or a twist in the flue means a flexible liner instead of a rigid one, and it can add labor. Masonry condition is the other major variable. A chimney with a spalled crown and cracked tiles may need restoration before any liner goes in, and that’s the difference between the low end of the liner range and a job that reaches the rebuild tier. Access matters as well. A chimney on a steep roof or tight against a neighbor’s lot takes more setup than an open, easy-to-reach stack.
If you’re comparing a repair quote to a rebuild quote, read each line carefully. A rebuild that doesn’t include a new liner or a new crown is leaving the job half done, and you’ll be paying for that work separately later. Full-scope capability from routine maintenance to structural correction means one relationship covers the chimney’s entire lifecycle, and that’s how we approach Greensboro work.
What Affects Chimney Liner & Rebuild Pricing in Greensboro
Pricing in Greensboro isn’t a flat rate card. Several things move the number, and knowing them helps you read a quote intelligently.
- Liner material and type. Flexible stainless is the workhorse for most relines. Rigid stainless costs more up front but lasts longer where the flue allows it. Cast-in-place systems are another option. The material choice, not the labor, drives a lot of the total.
- Flue condition. A clean, straight flue with sound tiles is the cheapest scenario. Cracked tiles, gaps at the joints, and spalling clay push the job toward HeatShield resurfacing or a full liner. The flue has to be assessed before anyone can quote accurately.
- Chimney height and roof access. Greensboro homes sit at a range of rooflines, from low ranch profiles to tall two-story stacks. More height means more liner, more scaffolding or ladder setup, and more time. Access is worked into the labor line.
- Masonry damage above the roofline. In this part of North Carolina, freeze-thaw cycles in winter and heavy summer rain work on brick and mortar. A crown that’s cracked lets water into the stack, and water in the masonry is what turns a $1,200 crown repair into a rebuild. Catching it early keeps the price down.
- Whether the appliance is a fireplace, insert, or wood stove. The liner has to be sized and rated for what’s venting through it. A wood stove needs a correctly sized flue to draft cleanly; an insert needs its own connection. Getting the size right the first time is part of the estimate.
- Code requirements and permits. Most chimney relining work requires a permit in Greensboro, and the liner has to meet current venting standards for the appliance. Ask your city’s building department about permit requirements, and factor the permit into the project cost.
If you’re in the market and want to understand how a liner fits into the bigger picture of chimney upkeep, our Greensboro chimney cleaning page lays out how we handle sweeps, inspections, and repairs as one integrated service. The liner, cap, crown, and firebox function as one system; a repair on one part affects the others, which is why we look at the whole chimney rather than just the flue.
How to Save on Chimney Liner & Rebuild
You can’t make a rebuild cheap, but you can keep a small problem from becoming an expensive one. Here’s how to protect your budget.
- Get the chimney inspected before you have a problem. A video scan of the flue catches a cracked tile or a failing joint while it’s still a liner question, not a rebuild. The cost of an inspection is small compared with the cost of rebuilding a stack after water has got into the masonry.
- Fix the crown early. A crown that sheds water properly is the cheapest insurance a chimney has. Rebuilding a cracked crown is estimated at $900 to $1,800; rebuilding the chimney above the roofline runs into five figures. Don’t let a $1,200 job turn into a $10,000 one.
- Combine the services on one visit. If the chimney is due for a sweep and the flue needs a scan, having the same crew do both means one setup, one access charge, and one point of accountability. We inspect it, we repair it.
- Ask about restoration before replacement. A HeatShield resurfacing can restore a flue that’s cracked but structurally sound, and it’s typically less than a full stainless reline. Not every flue qualifies, but it’s worth asking before you assume you need a whole new liner.
- Get a written, itemized estimate. Ask for each line item separately – liner, cap, crown, masonry, permit – so you can see where the money goes and compare quotes fairly. A single lump-sum number hides what you’re actually paying for.
Free estimates are part of how we work. Call (888) 366-5537 to book one. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Is a Chimney Reline Always Necessary, or Can You Repair the Existing Liner?
Not always. A flue with sound clay tiles and intact joints can often be resurfaced rather than fully relined. A HeatShield flue resurfacing restores cracked or spalled tiles from the inside and is estimated at $1,600 to $3,400, which is less than a full stainless reline. The catch is that the flue has to be structurally sound enough to hold the resurfacing material. If the tiles are crumbling, separated, or missing sections, the flue needs a full liner. That decision is made after a video inspection, not over the phone. Call (888) 366-5537 for an exact quote – estimates are free.
How Much Does a Chimney Rebuild Cost in Greensboro?
A partial rebuild runs an estimated $2,800 to $6,500 and covers the section above the roofline. A full rebuild from the foundation up is estimated at $6,000 to $14,000. The gap comes down to how much of the stack has failed – a crown and a few courses of brick is a partial job; a chimney with failed mortar joints throughout, a leaning stack, or a firebox that needs to be rebuilt from the inside is a full rebuild. Masonry condition above the roofline is what determines which tier you’re in. Call (888) 366-5537 to have the stack looked at and get a written estimate.
Can You Fix a Cracked Chimney Liner the Same Day?
Often, yes. A straightforward flexible liner install on a standard flue is usually a one-day job, and a HeatShield resurfacing can be completed in a day as well. Taller stacks, off-set flues, or jobs that involve crown or masonry work can take longer. We schedule the work after the inspection so the crew has the right liner and components on hand, and we tell you up front how long your chimney will take. Same-day service is available in many cases. Call (888) 366-5537 to find out what your chimney needs.
Is It Cheaper to Repair the Liner or Replace the Whole Chimney?
Repairing the liner is almost always cheaper – a reline is estimated at $2,400 to $5,600, while a full rebuild is $6,000 to $14,000. A rebuild is only necessary when the masonry itself has failed, not just the flue. If the brick and mortar are sound and only the liner is compromised, a reline is the right call and the lower cost. If the stack is leaning, the mortar joints are failing throughout, or water has damaged the structure, a rebuild is the only durable fix. An inspection tells you which situation you’re in. Call (888) 366-5537 for a free estimate.
Do I Need a Permit for Chimney Liner Work in Greensboro?
In most cases, yes. Relining a flue is generally permitted work in Greensboro, and the liner has to meet current venting standards for the appliance it serves. The permit cost is part of the project, and a properly permitted job protects you if you ever sell the house or have a chimney fire claim. Ask your city’s building department about the specific requirements for your address, and we’ll factor the permit into your written estimate. Call (888) 366-5537 to talk through your project.
Why Choose a Specialist for Liner and Rebuild Work?
A general handyman can sweep a chimney. Liner and rebuild work is a different category of job. The liner has to be sized to the appliance, rated for the temperatures it will see, and installed so the flue drafts correctly. Getting it wrong is a safety issue, not just a performance issue. Our technicians have up to 11 years of experience and work with professional-grade product lines – DuraFlex and HeatShield for liner and relining work, Copperfield and Famco for components sourced from professional supply channels. Those are materials you won’t find at a big-box store, and that matters when the job has to last.
When you’re ready to have your chimney looked at, we handle the inspection, the sweep, and the repair under one provider. One call covers sweep, inspection, and repair. We serve homeowners across Greensboro with fireplaces, inserts, and fuel-burning appliance venting, and we treat the flue, liner, cap, and firebox as a single system rather than isolated parts. Safe draft, clean burn – that’s the outcome the work is for.
Call (888) 366-5537 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often available, and upfront pricing means you’ll know the number before we start. Estimates are free, and the written estimate sets the final price.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Greensboro? A chimney liner replacement in Greensboro is estimated at $2,400 to $5,600, depending on liner material, flue length, and access. Flexible stainless is on the lower end; rigid sectional liners run higher. Call (888) 366-5537 for an exact quote – estimates are free.
How much does a chimney rebuild cost in Greensboro? A partial rebuild above the roofline is estimated at $2,800 to $6,500, and a full rebuild runs $6,000 to $14,000. The difference is how much masonry has failed. A crown repair alone is far less, at $900 to $1,800. Call (888) 366-5537 to have your stack assessed.
Is it cheaper to reline or rebuild my chimney? Relining is almost always cheaper. A reline is estimated at $2,400 to $5,600; a rebuild is $6,000 to $14,000. If the brick and mortar are sound and only the liner has failed, a reline is the right and lower-cost fix. Call (888) 366-5537 and we’ll tell you which yours needs.
Can you fix a cracked liner the same day? In many cases, yes. A standard flexible liner install or a HeatShield resurfacing is usually a one-day job. Taller stacks and offset flues can take longer. Same-day service is often possible. Call (888) 366-5537 to schedule.
Do I need a permit for chimney relining in Greensboro? Usually yes. Relining is generally permitted work in Greensboro, and the liner must meet current venting standards. Ask your city’s building department about the requirement for your address, and we’ll include the permit in your written estimate. Call (888) 366-5537 for a free quote.
Pricing reflects the Greensboro market as of 2026. Greensboro Chimney Cleaning offers free estimates – call (888) 366-5537.
Written by the team at Greensboro Chimney Cleaning.
What Our Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Aisha Nash"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Kurt Quinn"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Emily Rhodes